IDES Prospector Already have an account? Login Here

IDES

Lucalor® PEY 436

Chlorinated Polyvinyl Chloride

Supplied by Arkema

The technical datasheet with complete property values for Lucalor® PEY 436 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Lubricant
Features 
  • Good Impact Resistance
  • High Heat Resistance
  • Lubricated
Forms 
  • Powder
Processing Method 
  • Profile Extrusion
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength (73°F)
ft·lb/in²
 ISO 179/1eA 2
Charpy impact strength (73°F)
 
 ISO 179/1eU 2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
 ISO 75-2 2
Vicat Softening Temperature (50°C/h, B (50N))
°F
 ISO 306 2
Flammability
Nominal Value
Unit
Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)
 
 ISO 1210 2
Oxygen index
%
 ISO 4589-2 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lucalor® PEY 436, Lucalor PEY 436, Lucalor® , Lucalor, LucalorPEY436, PEY 436, PEY436, Polyvinyl Chloride, Chlorinated, Polyvinyl Chloride Chlorinated, CPVC, Polyvinyl Chloride, PVC, Arkema, PolyvinylChlorideChlorinated, PolyvinylChloride, 436PEY
Features
Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.