IDES Prospector Already have an account? Login Here

IDES

Latishield 66-08A G/25-V0KB1

Polyamide 66

Glass Fiber Reinforcement, 25%; Steel Filler

Supplied by LATI S.p.A.

The technical datasheet with complete property values for Latishield 66-08A G/25-V0KB1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMI shielding product based on Polyamide 66 (PA 66).
Steel fibres. Glass fibres. UL94 V-0 classified, with red phosphorous.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 25% Filler by Weight
  • Steel Filler
  
Features 
  • Electromagnetic Shielding (EMI)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/5
Tensile Strain (Break, 73°F)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Comparative Tracking Index 3 (Solution A)
V
 IEC 60112
Electromagnetic Reflection
%
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in
 
  
0.0591 in
 
  
0.118 in
 
  
Oxygen Index
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Latishield 66-08A G/25-V0KB1, Latishield 6608A G25V0KB1, Latishield , Latishield6608AG25V0KB1, 66, 66 08 A G 25 V 0 KB 1, 66-08A G/25-V0KB1, 6608A G25V0KB1, 66-08A G:25-V0KB1, 66-08A G+25-V0KB1, 66-08A G-25-V0KB1, 66-08A G_25-V0KB1, 66-08A G 25-V0KB1, 66:08A G/25:V0KB1, 66/08A G/25/V0KB1, 66+08A G/25+V0KB1, 66_08A G/25_V0KB1, 66 08A G/25 V0KB1, 6608, 08A, AG, G25, 25V, V0, 0KB, KB1, 6608AG25V0KB1, 6608A G_25V0KB1, 6608A G 25V0KB1, 66_08A G25_V0KB1, 66 08A G25 V0KB1, 6608AG_25V0KB1, 66_08AG25_V0KB1, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Lati, Polyamide66, Nylon66, 0866
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Electromagnetic Shielding (EMI), EMI Shielding.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2at 60 Mpa of cavity pressure
3Without Surfactant
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.