IDES Prospector Already have an account? Login Here

IDES

Altuglas® VS

Polymethyl Methacrylate Acrylic

Supplied by Altuglas International of Arkema Inc.

The technical datasheet with complete property values for Altuglas® VS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
 
Forms 
  • Granules
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
ISO 1133
Molding Shrinkage - Flow
in/in
ASTM D955
Water Absorption (Equilibrium, 73°F, 50% RH)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/2C
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179/2U
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
CLTE - Flow
in/in/°F
ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
UL 94
Optical
Nominal Value
Unit
Test Method
Refractive Index 2
 
ISO 489
Transmittance
%
ASTM D1003
Haze
%
ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Altuglas® VS, Altuglas VS, Altuglas® , Altuglas, AltuglasVS, VS, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Altuglas/Arkema, AcrylicPolymethylMethacrylate, AcrylicPMMA
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Method B
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.