IDES Prospector Already have an account? Login Here

IDES

Pebax® MV 1074 SN 01

Polyether Block Amide

Supplied by Arkema

The technical datasheet with complete property values for Pebax® MV 1074 SN 01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Antistatic
Features 
  • Antistatic
  • Electrically Conductive
  • Good Impact Resistance
  • Good UV Resistance
  • High Heat Resistance
Appearance 
  • Clear/Transparent
Forms 
  • Granules
Processing Method 
  • Blow Molding
  • Calendering
  • Casting
  • Coating
  • Extrusion
  • Film Extrusion
  • Injection Molding
  • Profile Extrusion
  • Resin Transfer Molding
  • Sheet Extrusion
  • Thermoforming
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Dry
Conditioned
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Melt volume-flow rate (235°C/1.0 kg)
--
in³/10min
 ISO 1133 2
Water Absorption
       ISO 62 2
Saturation
--
%
  
Equilibrium
--
%
  
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (50% Strain)
psi
 ISO 527-2 2
Tensile Strain (Break)
%
 ISO 527-2 2
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
       ISO 179/1eA 2
-22°F
--
 
  
73°F
 
  
Charpy impact strength
       ISO 179/1eU 2
-22°F
 
  
73°F
 
  
Thermal
Dry
Conditioned
Unit
Test Method
Glass Transition Temperature 3
--
°F
 ISO 11357-2 2
Melting Temperature 3
--
°F
 ISO 11357-3 2
Electrical
Dry
Conditioned
Unit
Test Method
Surface resistivity
--
ohm
 IEC 60093 2
Volume resistivity
ohm·in
 IEC 60093 2
Electric strength
--
V/mil
 IEC 60243-1 2
Flammability
Dry
Conditioned
Unit
Test Method
Oxygen index
--
%
 ISO 4589-2 2
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® MV 1074 SN 01, Pebax MV 1074 SN 01, Pebax® , Pebax, PebaxMV1074SN01, MV 1074 SN 01, MV1074, 1074SN, SN01, MV1074SN01, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, 1074MV
Features
Dry
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Heat Resistance, Good Impact Resistance.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® MV 1074 SN 01, Pebax MV 1074 SN 01, Pebax® , Pebax, PebaxMV1074SN01, MV 1074 SN 01, MV1074, 1074SN, SN01, MV1074SN01, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, 1074MV
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
318 °F/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.