Orgalloy® LT 4060ES Arkema Polyamide 6 Alloy

General

Material Status

Availability

Features

Forms

Processing Method

Multi-Point Data

Physical	Dry	Conditioned	Unit	Test Method
Density			lb/in³	ISO 1183²
Melt volume-flow rate (235°C/5.0 kg)		--	in³/10min	ISO 1133²
Water Absorption				ISO 62²
Saturation		--	%
Equilibrium		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	--		psi	ISO 527-2²
Tensile Stress (50% Strain)	--		psi	ISO 527-2²
Tensile Strain (Break)	--		%	ISO 527-2²
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (66 psi)		--	°F	ISO 75-2²
Melting Temperature³		--	°F	ISO 11357-3²
Electrical	Dry	Conditioned	Unit	Test Method
Comparative tracking index	--			IEC 60112²
Flammability	Dry	Conditioned	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)		--		ISO 1210²
Burning Behav. at thickness h (0.126 in)		--		ISO 1210²
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Orgalloy® LT 4060ES, Orgalloy LT 4060ES, Orgalloy® , Orgalloy, OrgalloyLT4060ES, LT 4060 ES, LT 4060ES, LT4060, 4060ES, LT4060ES, Polyamide 6 Alloy, Nylon 6 Alloy, Polyamide, Nylon, Arkema, Polyamide6Alloy, Nylon6Alloy, 4060LT
Features
Dry	Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Orgalloy® LT 4060ES, Orgalloy LT 4060ES, Orgalloy® , Orgalloy, OrgalloyLT4060ES, LT 4060 ES, LT 4060ES, LT4060, 4060ES, LT4060ES, Polyamide 6 Alloy, Nylon 6 Alloy, Polyamide, Nylon, Arkema, Polyamide6Alloy, Nylon6Alloy, 4060LT

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

Orgalloy® LT 4060ES