Orgalloy® RS 6630 Arkema Polyamide 66 Alloy (Unspecified Filler\Reinfor.)

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Unspecified Filler\Reinfor.

Features

High Heat Resistance

Platable

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Profile Extrusion

Resin Transfer Molding

Multi-Point Data

Shear Modulus vs. Temperature (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density			lb/in³	ISO 1183²
Melt volume-flow rate (275°C/2.16 kg)		--	in³/10min	ISO 1133²
Water Absorption				ISO 62²
Saturation		--	%
Equilibrium		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	--		psi	ISO 527-2²
Tensile Stress (Break)	--		psi	ISO 527-2²
Tensile Strain (Break)	--		%	ISO 527-2²
Tensile Creep Modulus				ISO 899-1²
1 hr	--		psi
1000 hr	--		psi
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2²
66 psi		--	°F
264 psi		--	°F
Vicat Softening Temperature (50°C/h, B (50N))		--	°F	ISO 306²
Melting Temperature³		--	°F	ISO 11357-3²
CLTE				ISO 11359-2²
Flow		--	in/in/°F
Transverse		--	in/in/°F
Electrical	Dry	Conditioned	Unit	Test Method
Surface resistivity	--		ohm	IEC 60093²
Volume resistivity	--		ohm·in	IEC 60093²
Relative Permittivity				IEC 60250²
100 Hz	--
1 MHz	--
Dissipation Factor				IEC 60250²
100 Hz	--
1 MHz	--
Comparative tracking index	--			IEC 60112²
Electric strength			V/mil	IEC 60243-1²
Flammability	Dry	Conditioned	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)		--		ISO 1210²
Burning Behav. at thickness h (0.126 in)		--		ISO 1210²
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Orgalloy® RS 6630, Orgalloy RS 6630, Orgalloy® , Orgalloy, OrgalloyRS6630, RS 6630, RS6630, Polyamide 66 Alloy, Nylon 66 Alloy, Polyamide, Nylon, Arkema, Polyamide66Alloy, Nylon66Alloy, 6630RS
Features
Dry	Features may also be described by the following terms: High Heat Resistance.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Orgalloy® RS 6630, Orgalloy RS 6630, Orgalloy® , Orgalloy, OrgalloyRS6630, RS 6630, RS6630, Polyamide 66 Alloy, Nylon 66 Alloy, Polyamide, Nylon, Arkema, Polyamide66Alloy, Nylon66Alloy, 6630RS

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

Orgalloy® RS 6630

Polyamide 66 Alloy

Unspecified Filler\Reinfor.

Supplied by Arkema