Terluran HI-10 Styrolution Acrylonitrile Butadiene Styrene

Product Description

Terluran HI-10 is an injection molding and extrusion grade of ABS with very high toughness and medium flow.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Additive

Impact Modifier

Features

Impact Modified

Medium Flow

Ultra High Toughness

Agency Ratings

RoHS Compliance

Appearance

Natural Color

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Profile Extrusion

Sheet Extrusion

Multi-Point Data

Creep Modulus vs. Time (ISO 11403-1)

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Specific Volume vs Temperature (ISO 11403-2)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR)
200°C/5.0 kg		in³/10min	ASTM D1238
220°C/10.0 kg		in³/10min	ASTM D1238, ISO 1133
230°C/3.8 kg		in³/10min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption (Saturation, 73°F)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
73°F		psi	ASTM D638
73°F		psi	ISO 527-2
Tensile Strength
Yield, 73°F		psi	ASTM D638
Yield, 73°F		psi	ISO 527-2
Break²		psi	ASTM D638
Tensile Elongation
Yield, 73°F²		%	ASTM D638
Yield, 73°F		%	ISO 527-2
Nominal Tensile Strain at Break (73°F)		%	ISO 527-2
Flexural Modulus (73°F)		psi	ASTM D790
Flexural Strength
73°F		psi	ASTM D790
73°F		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179
-22°F		ft·lb/in²
73°F
Notched Izod Impact			ASTM D256
-22°F		ft·lb/in
0°F		ft·lb/in
73°F		ft·lb/in
Unnotched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		°F	ASTM D648
66 psi, Unannealed		°F	ISO 75-2/B
66 psi, Annealed		°F	ASTM D648
264 psi, Unannealed		°F	ASTM D648
264 psi, Unannealed		°F	ISO 75-2/A
264 psi, Annealed		°F	ASTM D648
Vicat Softening Temperature		°F	ISO 306/B50, ASTM D1525³
CLTE - Flow		in/in/°F	ISO 11359-2
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257, IEC 60093
Dielectric Constant
0.0394 in, 1 MHz			ASTM D150
100 Hz			IEC 60250
1 MHz			IEC 60250
Dissipation Factor			IEC 60250
100 Hz
1 MHz
Comparative Tracking Index		V	IEC 60112
Electric Strength (0.0591 in)		V/mil	IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Terluran® HI-10, Terluran HI10, Terluran® , Terluran, TerluranHI10, HI, HI-10, HI10, HI:10, HI/10, HI+10, HI_10, HI 10, Acrylonitrile Butadiene Styrene, ABS, Styrolution, AcrylonitrileButadieneStyrene, 10HI
Features
Features may also be described by the following terms: Ultra High Toughness, Medium Flow, Medium Melt, Medium MFI.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ULC (1), FDA (1), NSF (1), EC (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²2.0 in/min

³Rate A (50°C/h), Loading 2 (50 N)

Terluran® HI-10

Acrylonitrile Butadiene Styrene

Supplied by Styrolution