IDES Prospector Already have an account? Login Here

IDES

Paxon™ 7000 Series

High Density Polyethylene Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Paxon™ 7000 Series is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Paxon™ 7000 series of crosslinkable mHDPE resins are designed to offer outstanding ESCR, toughness, thermal, impact and notch failure resistance. These resins are ideally suited for applications that require excellent part fill during processing and oustanding finished part performance. Paxon™ 7000 series grades are all supplied with long term UV stabilization.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Physical
Nominal Value
Unit
Test Method
Environmental Stress-Cracking Resistance
     ASTM D1693A
10% Igepal, F50
hr
  
100% Igepal, F50
hr
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus - 1% Secant
psi
 ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-40°F)
ft·lb/in
 ASTM D256
Impact Strength
     ARM
-40°F, 0.125 in
ft·lb
  
-40°F, 0.250 in
ft·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
  • All physical properties were measured on 3 mm rotomolded samples unless a different value is shown, except for ESCR, which was
measured on compression molded samples.
  • Test procedures may be modified to accommodate operating conditions or facility limitations.
Legal Statement
This product is not intended for use in food contact application.

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Paxon™ 7000 Series, Paxon 7000 Series, Paxon™ , Paxon, Paxon7000Series, 7000 Series, 7000Series, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, ExxonMobil, PolyethyleneHighDensity, Series7000
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.