IDES Prospector Already have an account? Login Here

IDES

WPP PP M2956-002

Polypropylene

Mineral Filler, 25%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PP M2956-002 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler, 25% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Impact Resistance
  • Good Stiffness
  • Heat Stabilized
Uses 
  • Automotive Interior Parts
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
ASTM D1238
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus - Tangent
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP M2956-002, WPP PP M2956002, WPP PP , WPPPPM2956002, WPPPP, M 2956, PPM 2956 002, PPM 2956, PPM2956-002, PPM2956002, PPM2956:002, PPM2956/002, PPM2956+002, PPM2956_002, PPM2956 002, PPM2956, M 2956 002, M2956-002, M2956002, M2956:002, M2956/002, M2956+002, M2956_002, M2956 002, M2956, 2956002, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Washington Penn, PolypropyleneUnspecified, PPUnspecified, 2956M, 2956PPM
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Impact Resistance, Good Stiffness, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): PACKARD (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.