IDES Prospector Already have an account? Login Here

IDES

WPP PP PPC1TF2-BLK

High Melt Strength Polypropylene

Talc Filler, 20%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PP PPC1TF2-BLK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Copolymer
  • Good Melt Strength
  • Heat Stabilized
Uses 
  • Electrical/Electronic Applications
Automotive Specifications 
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus - Tangent
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Gardner Impact (73°F)
in·lb
 ASTM D3029
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP PPC1TF2-BLK, WPP PP PPC1TF2BLK, WPP PP , WPPPPPPC1TF2BLK, WPPPP, PPC 1 TF 2, PPPPC 1 TF 2 BLK, PPPPC 1 TF 2, PPC1TF2, PPPPC1TF2-BLK, PPPPC1TF2BLK, PPPPC1TF2:BLK, PPPPC1TF2/BLK, PPPPC1TF2+BLK, PPPPC1TF2_BLK, PPPPC1TF2 BLK, PPPPC1, PPPPC1TF2, PPC 1 TF 2 BLK, PPC1TF2-BLK, PPC1TF2BLK, PPC1TF2:BLK, PPC1TF2/BLK, PPC1TF2+BLK, PPC1TF2_BLK, PPC1TF2 BLK, PPC1, 1TF, TF2, 2BLK, Polypropylene, High Melt Strength, Polypropylene High Melt Strength, PP, HMS, PP HMS, Polypropylene, PP, Washington Penn, PolypropyleneHighMeltStrength, PPHMS, 1PPC, 1PPPPC
Features
Features may also be described by the following terms: Good Melt Strength, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1), PACKARD (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.