IDES Prospector Already have an account? Login Here

IDES

Denka ABS GTR-10

Acrylonitrile Butadiene Styrene

Supplied by DENKA

The technical datasheet with complete property values for Denka ABS GTR-10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • High Flow
  • Medium Impact Resistance
  
Uses 
  • Automotive Interior Parts
  • Protective Coverings
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.250 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in, ALL)
 
 UL 94
Additional Information
Elongation at Break, ASTM D790, 23°C: < 10%
Water Absorbtion, ASTM D570, in water, 23°C, 24 hrs: < 3.5%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Denka ABS GTR-10, Denka ABS GTR10, Denka ABS , DenkaABSGTR10, DenkaABS, GTR, ABSGTR-10, ABSGTR10, ABSGTR:10, ABSGTR/10, ABSGTR+10, ABSGTR_10, ABSGTR 10, ABSGTR, GTR-10, GTR10, GTR:10, GTR/10, GTR+10, GTR_10, GTR 10, Acrylonitrile Butadiene Styrene, ABS, Denka, AcrylonitrileButadieneStyrene, 10GTR, 10ABSGTR
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Medium Impact Resistance.
Uses
Uses may also be described by the following terms: Protective Coverings, Protective Covering.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.