Denka ABS GTE-30 Denka Acrylonitrile Butadiene Styrene

General

Material Status

Availability

Uses

Forms

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 73°F)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-22°F, 0.250 in		ft·lb/in
73°F, 0.250 in		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.250 in)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525
CLTE - Flow		in/in/°F	ASTM D696
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0625 in, ALL)			UL 94
Additional Information
Elongation at Break, ASTM D790, 23°C: < 10% Water Absorbtion, ASTM D570, in water, 23°C, 24 hrs: < 0.35%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Denka ABS GTE-30, Denka ABS GTE30, Denka ABS , DenkaABSGTE30, DenkaABS, GTE, ABSGTE-30, ABSGTE30, ABSGTE:30, ABSGTE/30, ABSGTE+30, ABSGTE_30, ABSGTE 30, ABSGTE, GTE-30, GTE30, GTE:30, GTE/30, GTE+30, GTE_30, GTE 30, Acrylonitrile Butadiene Styrene, ABS, Denka, AcrylonitrileButadieneStyrene, 30GTE, 30ABSGTE

Notes

¹Typical properties: these are not to be construed as specifications.

Denka ABS GTE-30