Denka ABS SE-10 Denka Acrylonitrile Butadiene Styrene

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Uses

Appliance Components

Sheet

Forms

Pellets

Processing Method

Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 73°F)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-22°F, 0.250 in		ft·lb/in
-4°F, 0.250 in		ft·lb/in
32°F, 0.250 in		ft·lb/in
73°F, 0.250 in		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.250 in)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525
CLTE - Flow		in/in/°F	ASTM D696
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0625 in, ALL)			UL 94
Additional Information
Elongation at Break, ASTM D790, 23°C: < 10% Water Absorbtion, ASTM D570, in water, 23°C, 24 hrs: < 0.35%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Denka ABS SE-10, Denka ABS SE10, Denka ABS , DenkaABSSE10, DenkaABS, SE, ABSSE-10, ABSSE10, ABSSE:10, ABSSE/10, ABSSE+10, ABSSE_10, ABSSE 10, ABSSE, SE-10, SE10, SE:10, SE/10, SE+10, SE_10, SE 10, Acrylonitrile Butadiene Styrene, ABS, Denka, AcrylonitrileButadieneStyrene, 10SE, 10ABSSE
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts.

Notes

¹Typical properties: these are not to be construed as specifications.

Denka ABS SE-10

Acrylonitrile Butadiene Styrene

Supplied by DENKA