IDES Prospector Already have an account? Login Here

IDES

WPP TPO TPO-247 P Black

Compounded Polypropylene

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP TPO TPO-247 P Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Ductile
  • Good Impact Resistance
  • Good Toughness
  • Medium Flow
  • Medium Rigidity
Uses 
  • Automotive Applications
Automotive Specifications 
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Yield)
%
 ASTM D638
Flexural Modulus - Tangent 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Instrumented Dart Impact 4 (-22°F)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Additional Information
Filler Content, In-house #1003-02: 2%
Tensile Elongation at Yield, ASTM D638, 50mm/min: >500%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP TPO TPO-247 P Black, WPP TPO TPO247 P Black, WPP TPO , WPPTPOTPO247PBlack, WPPTPO, TPO, TPOTPO-247 P Black, TPOTPO247 P Black, TPOTPO:247 P Black, TPOTPO/247 P Black, TPOTPO+247 P Black, TPOTPO_247 P Black, TPOTPO 247 P Black, TPOTPO247, TPOTPO, TPOTPO247PBlack, TPO-247 P Black, TPO247 P Black, TPO:247 P Black, TPO/247 P Black, TPO+247 P Black, TPO_247 P Black, TPO 247 P Black, TPO247, 247P, PBlack, TPOTPO_247PBlack, TPO247PBlack, TPO_247PBlack, Polypropylene, Compounded, Polypropylene Compounded, Polypropylene, PP, Washington Penn, PolypropyleneCompounded, 247TPO, 247TPOTPO
Features
Features may also be described by the following terms: Good Toughness, Tough, Medium Rigidity, Good Rigidity, Medium Flow, Medium Melt, Medium MFI, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Injection
Nominal Value
Unit
 
Suggested Max Regrind
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
47.22 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.