IDES Prospector Already have an account? Login Here

IDES

WPP TPO TPO-2565 UV

Compounded Polypropylene

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP TPO TPO-2565 UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • UV Stabilizer
Features 
  • Ductile
  • Good Impact Resistance
  • Good Toughness
  • Good UV Resistance
  • Good Wear Resistance
  • High Flow
  • High Rigidity
  • Scratch Resistant
Uses 
  • Automotive Applications
Automotive Specifications 
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - Tangent 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore D
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP TPO TPO-2565 UV, WPP TPO TPO2565 UV, WPP TPO , WPPTPOTPO2565UV, WPPTPO, TPO, TPOTPO-2565 UV, TPOTPO2565 UV, TPOTPO:2565 UV, TPOTPO/2565 UV, TPOTPO+2565 UV, TPOTPO_2565 UV, TPOTPO 2565 UV, TPOTPO2565, TPOTPO, TPOTPO2565UV, TPO-2565 UV, TPO2565 UV, TPO:2565 UV, TPO/2565 UV, TPO+2565 UV, TPO_2565 UV, TPO 2565 UV, TPO2565, 2565UV, TPOTPO_2565UV, TPO2565UV, TPO_2565UV, Polypropylene, Compounded, Polypropylene Compounded, Polypropylene, PP, Washington Penn, PolypropyleneCompounded, 2565TPO, 2565TPOTPO
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, Scratch Resistant, Resists Scratches, Good Toughness, Tough, Good Impact Resistance, High Rigidity, High Flow, High Melt, High MFI, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Injection
Nominal Value
Unit
 
Suggested Max Regrind
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.050 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.