IDES Prospector Already have an account? Login Here

IDES

DEXFLEX® E1501 TF

Thermoplastic Polyolefin Elastomer

Supplied by LyondellBasell Advanced Polyolefins USA, Inc.

The technical datasheet with complete property values for DEXFLEX® E1501 TF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DEXFLEX® E1501 TF thermoplastic olefinic elastomer (TPO) is designed for extrusion applications requiring thermal stability, excellent low-temperature properties, and good dimensional stability over a broad temperature range. This material can be supplied with or without UV stabilizers.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Dimensional Stability
  • Good Thermal Stability
  
Automotive Specifications 
Processing Method 
  • Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) 2 (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Ultimate)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus - Tangent 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Gardner Impact
     ASTM D5420
-22°F
in·lb
  
73°F
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow (-22 to 176°F)
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DEXFLEX® E1501 TF, DEXFLEX E1501 TF, DEXFLEX® , DEXFLEX, DEXFLEXE1501TF, E 1501 TF, E1501 TF, E1501, 1501TF, E1501TF, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, LyondellBasell APO, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer, 1501E
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Thermal Stability.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
3Type IV, 2.0 in/min
40.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.