IDES Prospector Already have an account? Login Here

IDES

Topas® 6017S-04

Cyclic Olefin Copolymer

Supplied by Topas Advanced Polymers, Inc.

The technical datasheet with complete property values for Topas® 6017S-04 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Injection molding grade. Highest heat deflection temperature among the Topas product family. Suitable for applications requiring short-term, high temperature exposure.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • High Heat Resistance
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
%
  
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Glass Transition Temperature 3
°F
 ISO 11357-2
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
1 kHz
 
  
10 kHz
 
  
1.00 GHz
 
  
Dissipation Factor (1.00 GHz)
 
 IEC 60250
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ISO 489
Transmittance
%
 ISO 13468-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Topas® 6017S-04, Topas 6017S04, Topas® , Topas, Topas6017S04, 6017 S, 6017 S 04, 6017S-04, 6017S04, 6017S:04, 6017S/04, 6017S+04, 6017S_04, 6017S 04, 6017S, S04, Cyclic Olefin Copolymer, COC, Polyolefin, CyclicOlefinCopolymer, S6017
Features
Features may also be described by the following terms: High Heat Resistance.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Holding Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Injection Notes
Max. residence time: < 10 min; short interruption to cycle: reduce T x = 170°C !
Injection speed: 50 mm/sec - 150 mm/sec)
Processing temperatures:
T F =< 110 °C
T 1 =250-280 °C
T 2 =260-300 °C
T 3 =270-310 °C
T 4 =270-320 °C
T N =260-320 °C
T M =270-320 °C
Notes
1Typical properties: these are not to be construed as specifications.
2Shrinkage is dependent on processing conditions and part design.
310°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.