IDES Prospector Already have an account? Login Here

IDES

Clearflex® FG 106

Linear Low Density Polyethylene

Supplied by Polimeri Europa

The technical datasheet with complete property values for Clearflex® FG 106 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Clearflex® FG 106 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion.

Film manufactured with Clearflex® FG 106 are characterised by excellent optical properties (haze and gloss), optimum sealing performances and high mechanical properties.

Clearflex® FG106 is recommended for the production of agricultural film, blown stretch film coextruded or blended with LDPE.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • Food Contact Acceptable
  • Good Heat Seal
  • Hexene Comonomer
  • High Gloss
  • Opticals
Uses 
  • Agricultural Applications
  • Blending
  • Film
  • Stretch Wrap
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Modulus
     ISO 527-3
1% Secant, MD: 0.98 mil, Blown Film
psi
  
1% Secant, TD: 0.98 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 0.98 mil, Blown Film
psi
  
TD: Yield, 0.98 mil, Blown Film
psi
  
MD: Break, 0.98 mil, Blown Film
psi
  
TD: Break, 0.98 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 0.98 mil, Blown Film
%
  
TD: Break, 0.98 mil, Blown Film
%
  
Dart Drop Impact 2 (0.98 mil, Blown Film)
g
 ISO 7765-1
Elmendorf Tear Strength 3
     ISO 6383-2
MD: 1.0 mil
lbf/in
  
TD: 1.0 mil
lbf/in
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
 ASTM D2457
Haze (0.984 mil, Blown Film)
%
 ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clearflex® FG 106, Clearflex FG 106, Clearflex® , Clearflex, ClearflexFG106, FG 106, FG106, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, 106FG
Features
Features may also be described by the following terms: Hexene Comonomer, High Gloss, Good Heat Seal.
Uses
Uses may also be described by the following terms: Stretch Wrap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2F50
3Blown Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.