Clearflex FG 336 Polimeri Europa Polyethylene, Linear Low Density

Product Description

Clearflex® FG 336 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidant, slip agent, antiblocking agent and processing aid, suitable for blown film extrusion.

Films obtained from Clearflex® FG 336 show high rigidity together with optimum Elmendorf tear and impact resistance.

Clearflex® FG 336 is recommended for shipping sacks, where the perfect balance between additivation (in terms of slip and antiblocking) and mechanical performances leads to the manufacture of a tough and easy peelable film. Moreover, for its sealing characteristics, together with low temperature mechanical resistance, Clearflex® FG 336 is suggested for the production of freezer bags, either in coextrusion and in blend with LDPE.

General

Material Status

Commercial: Active

Availability

Europe

North America

Additive

Antiblock

Antioxidant

Processing Aid

Slip

Features

Antiblocking

Antioxidant

Copolymer

Food Contact Acceptable

Good Impact Resistance

Good Processability

Good Tear Strength

Good Toughness

Hexene Comonomer

High Rigidity

Slip

Uses

Bags

Film

Heavy-duty Bags

Agency Ratings

Forms

Pellets

Processing Method

Blown Film

Coextrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)			ISO 8295
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Film Thickness - Recommended / Available
Tensile Modulus			ISO 527-3
1% Secant, MD: 0.98 mil, Blown Film		psi
1% Secant, TD: 0.98 mil, Blown Film		psi
Tensile Stress			ISO 527-3
MD: Yield, 0.98 mil, Blown Film		psi
TD: Yield, 0.98 mil, Blown Film		psi
MD: Break, 0.98 mil, Blown Film		psi
TD: Break, 0.98 mil, Blown Film		psi
Tensile Elongation			ISO 527-3
MD: Break, 0.98 mil, Blown Film		%
TD: Break, 0.98 mil, Blown Film		%
Dart Drop Impact² (0.98 mil, Blown Film)		g	ISO 7765-1
Elmendorf Tear Strength³			ISO 6383-2
MD: 1.0 mil		lbf/in
TD: 1.0 mil		lbf/in
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature		°F	Internal Method
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 0.984 mil, Blown Film)			ASTM D2457
Haze (0.984 mil, Blown Film)		%	ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clearflex® FG 336, Clearflex FG 336, Clearflex® , Clearflex, ClearflexFG336, FG 336, FG336, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, 336FG
Features
Features may also be described by the following terms: Hexene Comonomer, Good Toughness, Tough, Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip, High Rigidity, Good Tear Strength, Good Impact Resistance, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²F50

³Blown Film

Clearflex® FG 336

Linear Low Density Polyethylene

Supplied by Polimeri Europa