IDES Prospector Already have an account? Login Here

IDES

Clearflex® CL 106

Linear Low Density Polyethylene

Supplied by Polimeri Europa

The technical datasheet with complete property values for Clearflex® CL 106 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Clearflex® CL 106 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion.

Films manufactured with Clearflex® CL 106 are characterised by high clarity, optimum elongation at break, optimum impact and tear resistance.

Clearflex® CL 106 is recommended for the production of low cling cast film with high optical properties and good mechanical resistance. It is ideal for the production of power stretch film characterized by a medium prestretch.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Tear Strength
  • Hexene Comonomer
  • High Clarity
  • High Elongation
  • Opticals
Uses 
  • Cast Film
  • Film
  • Stretch Wrap
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic, Cast Film)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Modulus
     ISO 527-3
1% Secant, MD: 0.91 mil, Cast Film
psi
  
1% Secant, TD: 0.91 mil, Cast Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 0.91 mil, Cast Film
psi
  
TD: Yield, 0.91 mil, Cast Film
psi
  
MD: Break, 0.91 mil, Cast Film
psi
  
TD: Break, 0.91 mil, Cast Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 0.91 mil, Cast Film
%
  
TD: Break, 0.91 mil, Cast Film
%
  
Dart Drop Impact 2 (0.91 mil, Cast Film)
g
 ISO 7765-1
Elmendorf Tear Strength 3
     ISO 6383-2
MD: 0.9 mil
lbf/in
  
TD: 0.9 mil
lbf/in
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.906 mil, Cast Film)
 
 ASTM D2457
Haze (0.906 mil, Cast Film)
%
 ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clearflex® CL 106, Clearflex CL 106, Clearflex® , Clearflex, ClearflexCL106, CL 106, CL106, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, 106CL
Features
Features may also be described by the following terms: Hexene Comonomer, High Clarity, High Elongation, Good Impact Resistance, Good Tear Strength.
Uses
Uses may also be described by the following terms: Stretch Wrap, Cast Film.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2F50
3Cast Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.