IDES Prospector Already have an account? Login Here

IDES

BCC Resins BC 5200

Epoxy; Epoxide

Supplied by BCC Products Inc.

The technical datasheet with complete property values for BCC Resins BC 5200 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BC 5200 is a medium viscosity fast gelling two part Epoxy Adhesive System. With an easy to use 1 to 1 mix ratio, BC 5200 is considered an excellent general purpose adhesive for in-shop use. BC 5200 will bond to wood, concrete, select plastics, and most metal surfaces.

Surface Preparation:
Areas to be adhered to should be clean and dry, free of dust, oil, and release agents. It is advisable to scarify the surface with sand paper prior to application.

Mixing Instructions:
Combine 1 part of Resin to 1 part of Hardener by weight or by volume. Setting time is 4 to 4.5 minutes. May be applied by any reasonable thickness by spreading or splining. Do not work with more material than can be applied in 4 minutes. Surfaces should be held in position until cure is affected.p
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Gel
  • Medium Viscosity
 
Uses 
  • Adhesives
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Compressive Strength
psi
ASTM D695
Shear Strength
psi
ASTM D732
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
     
Hardener
 
 
Resin
 
 
Pot Life (75°F)
min
 
Thermoset Mix Viscosity (75°F)
cP
ASTM D2393
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BCC Resins BC 5200, BCC Resins , BCCResinsBC5200, BCCResins, ResinsBC 5200, Resins, ResinsBC5200, BC 5200, BC5200, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, BCC Products, EpoxyEpoxide, 5200BC, 5200ResinsBC
Features
Features may also be described by the following terms: Medium Viscosity, Fast Gel.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.