IDES Prospector Already have an account? Login Here

IDES

BCC Resins BC 8165

Polyurethane

Supplied by BCC Products Inc.

The technical datasheet with complete property values for BCC Resins BC 8165 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BC 8165 is a low viscosity, rapid setting, rigid urethane compound. Similar to BC 8163, however exhibits an 8 to 10 minute working time. This system will cure quickly to a hard, tough, impact resistant casting. BC 8165 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. BC 8165 is recommended for thin wall model and prototype applications where a "thermoplastic feel" is desired.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Cure
  • Good Impact Resistance
  • Good Toughness
  • High Hardness
  • Low Viscosity
Uses 
  • Modeling Material
Appearance 
  • White
Forms 
  • Liquid
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Break)
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (75°F)
min
  
Thermoset Mix Viscosity (75°F)
cP
 ASTM D2393
Demold Time (77°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BCC Resins BC 8165, BCC Resins , BCCResinsBC8165, BCCResins, ResinsBC 8165, Resins, ResinsBC8165, BC 8165, BC8165, Polyurethane, Unspecified, Polyurethane Unspecified, PUR, Unspecified, PUR Unspecified, Polyurethane, PUR, BCC Products, PolyurethaneUnspecified, PURUnspecified, 8165BC, 8165ResinsBC
Features
Features may also be described by the following terms: Fast Cure, Fast Curing, Good Impact Resistance, Good Toughness, Tough, Low Viscosity, High Hardness, Hard.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.