IDES Prospector Already have an account? Login Here

IDES

BCC Resins BC 7136-2

Epoxy; Epoxide

Aluminum Filler

Supplied by BCC Products Inc.

The technical datasheet with complete property values for BCC Resins BC 7136-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BC 7136-2 is an aluminum filled thick section casting system with heat resistance to 300°F. May be cast to a thickness of 2 inches in non-conductive molds, 3 inches in conductive molds, and thicker sections with the addition of bulk fill. For service temperature above 150°F a post-cure is required. Does not contain VCHD or MDA. BC 7136-2 is recommended for uses such as: RTM and RIM molds, matched dies, injection and compression molds, and constructing vacuum form tools.

BC 7136-2 can be removed from the mold after allowing to set 24 hours at room temperature (75°F). Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours @ 300°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Aluminum Filler
Features 
  • High Heat Resistance
Uses 
  • Molds/Dies/Tools
Appearance 
  • Grey
Forms 
  • Liquid
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ASTM D1505
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Flexural Strength (Break)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (75°F)
min
  
Thermoset Mix Viscosity (75°F)
cP
 ASTM D2393
Demold Time
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BCC Resins BC 7136-2, BCC Resins BC 71362, BCC Resins , BCCResinsBC71362, BCCResins, BC 7136, ResinsBC 7136-2, ResinsBC 71362, ResinsBC 7136:2, ResinsBC 7136/2, ResinsBC 7136+2, ResinsBC 7136_2, ResinsBC 7136 2, ResinsBC7136, ResinsBC 7136, ResinsBC71362, BC 7136-2, BC 71362, BC 7136:2, BC 7136/2, BC 7136+2, BC 7136_2, BC 7136 2, BC7136, 71362, ResinsBC7136_2, BC71362, BC7136_2, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, BCC Products, EpoxyEpoxide, 7136BC, 7136ResinsBC
Features
Features may also be described by the following terms: High Heat Resistance.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.