IDES Prospector Already have an account? Login Here

IDES

Nucrel® 0407

Ethylene Methacrylic Acid

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Nucrel® 0407 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Nucrel® 0407 is a copolymer of ethylene and methacrylic acid made with nominally 4 wt% methacrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Uses 
  • Adhesives
  • Packaging
  • Sealants
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525, ISO 306
Melting Temperature
°F
 DSC, ISO 3146
Additional Information
Methacrylic Acid Content: 4%
Freezing Point (DSC), ASTM D3418: 84°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Nucrel® 0407, Nucrel 0407, Nucrel® , Nucrel, Nucrel0407, 0407, Ethylene Methacrylic Acid, EMAA, Thermoplastic Elastomer, TPE, DuPont P&IP, EthyleneMethacrylicAcid, ThermoplasticElastomer
Uses
Uses may also be described by the following terms: Sanitary Products.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Processing conditions shown are for extrusion coating/lamination.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.