Geon Vinyl Rigid Molding 6957 PolyOne Polyvinyl Chloride, Rigid

General

Material Status

Availability

Forms

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus²		psi	ASTM D638
Tensile Strength² (Yield)		psi	ASTM D638
Tensile Elongation³ (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256A
0°F, 0.125 in, Injection Molded		ft·lb/in
32°F, 0.125 in, Injection Molded		ft·lb/in
73°F, 0.125 in, Injection Molded		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed, 0.250 in		°F
66 psi, Annealed, 0.250 in		°F
264 psi, Unannealed, 0.250 in		°F
264 psi, Annealed, 0.250 in		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0579 in, GY)			UL 94
CSA Flammability⁴ (60.2 mil)
Additional Information	Nominal Value	Unit	Test Method
Relative Spiral Flow		in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Vinyl Rigid Molding 6957, Geon Vinyl Rigid Molding 6957, Geon™ Vinyl Rigid Molding , Geon Vinyl Rigid Molding, GeonVinylRigidMolding6957, GeonVinylRigidMolding, Molding 6957, Molding6957, Molding, 6957, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride, 6957Molding

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Type I, 2.0 in/min

³Type I, 0.20 in/min

⁴Gray

Geon™ Vinyl Rigid Molding 6957