IDES Prospector Already have an account? Login Here

IDES

RC Plastics RCPA66 GF 30

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by RC Plastics, Inc. (Div. of LNP Engineering Plastics)

The technical datasheet with complete property values for RC Plastics RCPA66 GF 30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Recycled Content 
  • Yes
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (Equilibrium, 73°F, 50% RH)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RC Plastics RCPA66 GF 30, RC Plastics , RCPlasticsRCPA66GF30, RCPlastics, PlasticsRCPA 66 GF 30, PlasticsRCPA66 GF 30, PlasticsRCPA66, Plastics, RCPA 66 GF 30, PlasticsRCPA66GF30, RCPA66 GF 30, RCPA66, 66GF, GF30, RCPA66GF30, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Polyamide66, Nylon66, 66RCPA, 66PlasticsRCPA
Generic Name
Generic Name may also be described by the following terms: PA66.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.