IDES Prospector Already have an account? Login Here

IDES

Hostacom 68F4-2

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostacom 68F4-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Hostacom" 68F4-2 fractional melt flow, 1,700 MPa flexural modulus, 20% talc-filled, blow molding and extrusion grade polypropylene homopolymer is designed for high strength, stiffness, impact resistance and processability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Latin America
  • North America
  
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Features 
  • Good Processability
  • Good Stiffness
  • High Impact Resistance
  • High Strength
  • Homopolymer
  • Low Flow
Uses 
  • Automotive Under the Hood
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus - Tangent 2
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostacom 68F4-2, Hostacom 68F42, Hostacom , Hostacom68F42, 68 F 4, 68F4, 68 F 4 2, 68F4-2, 68F42, 68F4:2, 68F4/2, 68F4+2, 68F4_2, 68F4 2, 68F, F4, 42, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, LyondellBasell, PolypropyleneHomopolymer, PPHomopolymer, F68
Features
Features may also be described by the following terms: Good Stiffness, High Strength, High Impact Resistance, Good Processability, Easy Processing, Low Flow, Low Melt, Low MFI.
Notes
1Typical properties: these are not to be construed as specifications.
20.050 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.