IDES Prospector Already have an account? Login Here

IDES

NAXELL™ PC110M

Polycarbonate

Supplied by MRC Polymers, Inc.

The technical datasheet with complete property values for NAXELL™ PC110M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PC110M is available in natural and custom colors, Further information and details are available upon request.
  • Polycarbonate for colorable products.
  • MFR can be modified between 10 to 40 g/10mins
  • Can be UV Stabilized
  • Internal and External lubricants can be added
  • Can be clear to color matched
  • Not for products that require stringent visual specification.
  • FR package cab be added
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • General Purpose
Uses 
  • General Purpose
Appearance 
  • Clear/Transparent
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F, 0.125 in)
psi
 ASTM D638
Tensile Elongation (Break, 73°F, 0.125 in)
%
 ASTM D638
Flexural Modulus (73°F, 0.125 in)
psi
 ASTM D790
Flexural Strength (73°F, 0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Instrumented Dart Impact 2 (73°F, 0.125 in, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
CLTE - Flow (-40 to 95°F)
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NAXELL™ PC110M, NAXELL PC110M, NAXELL™ , NAXELL, NAXELLPC110M, PC 110 M, PC110M, PC110, 110M, Polycarbonate, PC, MRC Polymers, 110PC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Dew Point
°F
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Injection Notes
Packing: 50 to 75% of injection pressure
Hold: 40 to 60% of injection pressure
Air Flow Rate: 0.8-1.0 CFM per lb/hour resin processed
Notes
1Typical properties: these are not to be construed as specifications.
211.0 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.