| Specific Gravity |
|
|
ASTM D792 |
| Melt Mass-Flow Rate (MFR) (280°C/2.16 kg) |
|
g/10 min
|
ASTM D1238 |
| Molding Shrinkage - Flow |
|
in/in
|
ASTM D955 |
| Water Absorption (Equilibrium, 73°F, 50% RH) |
|
%
|
ASTM D570 |
| Tensile Modulus |
|
psi
|
ASTM D638 |
| Tensile Strength |
|
psi
|
ASTM D638 |
| Tensile Elongation (Break) |
|
%
|
ASTM D638 |
| Flexural Modulus |
|
psi
|
ASTM D790 |
| Flexural Strength |
|
psi
|
ASTM D790 |
| Water Vapor Transmission |
|
g/100 in²/24 hr
|
ASTM E96 |
| Notched Izod Impact (0.126 in) |
|
ft·lb/in
|
ASTM D256 |
| Deflection Temperature Under Load (264 psi, Unannealed) |
|
°F
|
ASTM D648 |
| Glass Transition Temperature (DSC) |
|
°F
|
DSC |
| CLTE - Flow |
|
in/in/°F
|
ASTM D696 |
| Volume Resistivity |
|
ohm·cm
|
ASTM D257 |
| Dielectric Strength (0.0394 in) |
|
V/mil
|
ASTM D149 |
| Dielectric Constant (1 MHz) |
|
|
ASTM D150 |
| Dissipation Factor (1 MHz) |
|
|
ASTM D150 |
| Flame Rating - UL |
|
|
UL 94 |
| Refractive Index |
|
|
ASTM D542 |
| Transmittance (118 mil) |
|
%
|
ASTM D1003 |
|
The value listed as Melt Flow Rate, ASTM D1238, was tested in accordance with JIS K6719.
The value listed as Water Vapor Transmission, ASTM E96, was tested in accordance with JIS Z0208.
Pencil Hardness, JIS K5401: H
Water Absorption, ASTM D570: <.01%
Volume Resistivity, ASTM D257: >1E16 ohm cm
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zeonex 480S, Zeonex , Zeonex480S, 480 S, 480S, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Nippon Zeon, PolyolefinUnspecified, S480
|
|
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding.
|