NORYL GTX GTX918W Resin SABIC IP Euro Polyphenylene Ether + PS + Nylon

Product Description

NORYL GTX918W is an unfilled global grade, which offers an excellent combination of processability and heat resistance.

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Processability

High Heat Resistance

RoHS Compliance

Automotive Specifications

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (280°C/1.2 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow²		in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress			ISO 527-2/50
Yield		psi
Break		psi
Tensile Strain			ISO 527-2/50
Yield		%
Break		%
Flexural Modulus³		psi	ISO 178
Flexural Strength^3, 4		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁵			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength⁶			ISO 180/1A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁷ (66 psi, Unannealed, 3.94 in Span)		°F	ISO 75-2/Be
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test (257°F)			IEC 60695-10-2
CLTE			ISO 11359-2
Flow: 73 to 140°F		in/in/°F
Transverse: 73 to 140°F		in/in/°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0591 in
0.118 in
UL	Nominal Value	Unit	Test Method
RTI Str		°F	UL 746
RTI Imp		°F	UL 746
RTI Elec		°F	UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL GTX* GTX918W Resin, NORYL GTX GTX918W Resin, NORYL GTX* , NORYL GTX, NORYLGTXGTX918WResin, NORYLGTX, GTX 918 W Resin, GTX918W Resin, GTX918, 918W, WResin, GTX918WResin, Polyphenylene Ether + PS + Nylon, Polyphenylene Ether PS Nylon, Polyphenylene Ether : PS : Nylon, Polyphenylene Ether / PS / Nylon, Polyphenylene Ether - PS - Nylon, Polyphenylene Ether _ PS _ Nylon, Polyphenylene Ether PS Nylon, PPE+PS+Nylon, PPEPSNylon, PPE:PS:Nylon, PPE/PS/Nylon, PPE-PS-Nylon, PPE_PS_Nylon, PPE PS Nylon, Polyphenylene Ether, PPE, SABIC IP Euro, PolyphenyleneEtherPSNylon, PolyphenyleneEther, PolyphenyleneEther_PS_Nylon, 918GTX
Features
Features may also be described by the following terms: High Heat Resistance, Good Processability, Easy Processing.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Minimum Moisture Content: 0.02 %

Notes

¹Typical properties: these are not to be construed as specifications.

²Tensile Bar

³0.079 in/min

⁴Yield

⁵80*10*4 sp=62mm

⁶80*10*4

⁷120*10*4 mm

NORYL GTX* GTX918W Resin

Polyphenylene Ether + PS + Nylon

Supplied by SABIC Innovative Plastics Europe