IDES Prospector Already have an account? Login Here

IDES

CYROVU® HP2 Multipolymer Compound

Polymethyl Methacrylate Acrylic

Supplied by Evonik CYRO LLC

The technical datasheet with complete property values for CYROVU® HP2 Multipolymer Compound is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CYROVU HP2 is an impact-modified acrylic-based multipolymer for molding applications.

Typical properties of CYROVU HP2 compound are:
  • excellent mechanical properties
  • excellent bonding and welding capabilities
  • good light transmission
  • good impact strength
  • good melt flow rate
  • good heat resistance

Used for point-of-purchase displays.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Impact Modifier
Features 
  • Bondability
  • Good Flow
  • Good Impact Resistance
  • High Clarity
  • Impact Modified
  • Medium Heat Resistance
  • Weldable
Uses 
  • Decorative Displays
Agency Ratings 
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Apparent Density
g/cm³
 ASTM D1895
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (Saturation)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
32°F, 0.250 in
ft·lb/in
  
73°F, 0.250 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow (32 to 312°F)
in/in/°F
 ASTM D696
Optical
Nominal Value
Unit
Test Method
Transmittance (126 mil)
%
 ASTM D1003
Haze (126 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CYROVU® HP2 Multipolymer Compound, CYROVU HP2 Multipolymer Compound, CYROVU® HP2 , CYROVU HP2, CYROVUHP2MultipolymerCompound, CYROVUHP2, HP 2 Multipolymer Compound, HP 2, HP2Multipolymer Compound, HP2, 2Multipolymer, HP2MultipolymerCompound, Multipolymer Compound, MultipolymerCompound, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Cyro, AcrylicPolymethylMethacrylate, AcrylicPMMA, CompoundMultipolymer, 2HP
Features
Features may also be described by the following terms: Good Impact Resistance, Bondability, Bondable, High Clarity, Medium Heat Resistance, Good Flow.
Uses
Uses may also be described by the following terms: Decorative Displays.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.