Carilon D26CX100

Product names can be difficult to match. You may have searched any one of these terms to find this product: Carilon D26CX100, Carilon , CarilonD26CX100, D 26 CX 100, D26CX100, D26, 26CX, CX100, Polyketone, Polyketone (Aliphatic), Polyketone Aliphatic, PK, Shell Chemical, PolyketoneAliphatic, 26D

Features may also be described by the following terms: High Molecular Weight, High MW, Good Melt Strength, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, High Viscosity, High Impact Resistance.

Uses may also be described by the following terms: Tubing, Tube.

The plasticizer:
CARILON Polymers have been extruded with screw diameters in the range 20 mm to 75 mm and screw lengths 20 to 30D. This material shows good feeding without the use of grooved barrels, feed zone typically 6 to 8D. Gradual compression, ratio 2:1 to 3:1, over more than 7D is preferable with a metering zone typically more than 7D.

Typical operating conditions:
A typical barrel temperature profile would be from 220°C at the feed throat to 240°C at the die. Reverse- and flat-temperature profiles also may be used. Excessively high or low local temperatures should be avoided.

General suggestions:
Normal "good extrusion practice" should be followed. Avoid areas of stagnation for example, in breaker plates, adapters and at changes of flow direction. Smooth polished flow channels and high-chrome steels or chrome plating are beneficial to process consistency.