Endura® FSPP-211 PMC Group Polypropylene, Unspecified

Product Description

FSPP-211 is a highly loaded ready-to-use polypropylene compound designed primarily for injection molding applications which are required to meet the UL-94 standard of V-0 and the UL-746B long-term performance standard of 105°C at 0.058 inches in all colors.
Similar in flame-retardant characteristics to FSPP-201, FSPP-211 offers an alternative in physical properties; with higher impact strength and greater flexibility. In addition, it offers both good molding characteristics and long-term performance.

General

Material Status

Commercial: Active

Availability

North America

Features

Flame Retardant

Good Flexibility

Good Impact Resistance

Good Moldability

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Max. Continuous Use Temperature		°F	ASTM D794
Vicat Softening Temperature		°F	ASTM D1525
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Dielectric Strength		V/mil	ASTM D149
Dielectric Constant (1.00 GHz)			ASTM D150
Dissipation Factor (1.00 GHz)			ASTM D150
Arc Resistance (0.125 in)		sec	ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0580 in, All Colors)			UL 94
Oxygen Index (0.125 in)		%	ASTM D2863
Additional Information
The value listed as Max. Continuous Use Temp, ASTM D794, was tested in accordance with UL-746B. Dielectric Strength, ASTM D 149, moist: 814V/mil Volume Resistivity, ASTM D 150, moist: 26.4e10 High-Current Arc Resistance, UL-746, Arcs to Ignite, On Surface, 0.058in: No Ignition High-Current Arc Resistance, UL-746, Arcs to Ignite, On Surface, 0.125in: No Ignition High-Current Arc Resistance, UL-746, Arcs to Ignite, 1/16 in. above surface, 0.058in: No Ignition High-Current Arc Resistance, UL-746, Arcs to Ignite, 1/16 in. above surface, 0.125in: No Ignition High-Current Arc Resistance, UL-746, Arcs to Ignite, 1/4 in. above surface, 0.058in: No Ignition High-Current Arc Resistance, UL-746, Arcs to Ignite, 1/4 in. above surface, 0.125in: No Ignition Hot Wire Ignition, UL 746, Seconds to ignite, 0.058in: No Ignition Hot Wire Ignition, UL 746, Seconds to ignite, 0.125in: No Ignition Arc Tracking Ratio, UL 746, inches per minute, 0.058in: 0 Arc Tracking Ratio, UL 746, inches per minute, 0.125in: 0 High-Voltage Arc Resistance, UL 746, Seconds to track, 0.058in: No Track High-Voltage Arc Resistance, UL 746, Seconds to track, 0.1.25in: No Track High-Voltage Arc Resistance, UL 746, Seconds to ignite, 0.058in: No Ignition High-Voltage Arc Resistance, UL 746, Seconds to ignite, 0.1.25in: No Ignition
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Endura® FSPP-211, Endura FSPP211, Endura® , Endura, EnduraFSPP211, FSPP, FSPP-211, FSPP211, FSPP:211, FSPP/211, FSPP+211, FSPP_211, FSPP 211, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PMC Group, PolypropyleneUnspecified, PPUnspecified, 211FSPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Impact Resistance, Good Flexibility, Flexible, Good Moldability.

Notes

¹Typical properties: these are not to be construed as specifications.

Endura® FSPP-211

Polypropylene

Supplied by PMC Group Polymer Products