Already have an account? Login Here

IDES

MonoSol® M1040

Polyvinyl Alcohol

Supplied by MonoSol, LLC

The technical datasheet with complete property values for MonoSol® M1040 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General

Material Status

Commercial: Active

Availability

Europe

North America

Uses

Vacuum Bagging Film

Forms

Film

Films	Nominal Value	Unit	Test Method
Tensile Strength - MD (Break)		psi	ASTM D882
Tensile Elongation - MD (Break)		%	ASTM D882
Elmendorf Tear Strength - MD		g	ASTM D1922
Thermal	Nominal Value	Unit	Test Method
Max. Continuous Use Temperature		°F	ASTM D794
Additional Information
Modulus at 100% Elongation, ASTM D882: 2900 psi Yield per Thousandth of an Inch, Test Method Unspecified: 143 ft2/lb
Related Terminology
This supplier and product may also be known by these terms: Mono-Sol Product names can be difficult to match. You may have searched any one of these terms to find this product: MonoSol® M1040, MonoSol M1040, MonoSol® , MonoSol, MonoSolM1040, M 1040, M1040, Polyvinyl Alcohol, PVOH, Vinyl Alcohol, VOH, PolyvinylAlcohol, VinylAlcohol, 1040M
Uses
Uses may also be described by the following terms: Vacuum Bagging Film.

Notes

¹Typical properties: these are not to be construed as specifications.

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.