IDES Prospector Already have an account? Login Here

IDES

Solprene® 412

Styrene Butadiene Block Copolymer

Supplied by INSA

The technical datasheet with complete property values for Solprene® 412 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Solprene 412 is a radial oil extended styrene-butadiene block copolymer with a 30% styrene content, most of it present as a polystyrene block which gives the polymer a thermoplastic behavior. It is oil-extended with 6 phr paraffinic oil. It develops properties of vulcanized rubber without the need for
vulcanization. It is protected with a non staining antioxidant system and is essentially gel free with a very clear color.

Solprene 412 is used as elastomeric modifier for asphalt and as ingredient in compounding for shoe soles, injection molding and other thermoplastic goods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Low Gel
  • Stain Resistant
Uses 
  • Asphalt Modification
  • Compounding
  • Footwear
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 ASTM D1238
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (300% Strain)
psi
 ASTM D412
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Additional Information
The value listed as density, ASTM D792, was tested in accordance with ASTM D297.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Solprene® 412, Solprene 412, Solprene® , Solprene, Solprene412, 412, Styrene Butadiene Block Copolymer, SBC, Thermoplastic Elastomer, TPE, sb, INSA, StyreneButadieneBlockCopolymer, ThermoplasticElastomer
Features
Features may also be described by the following terms: Low Gel, Stain Resistant, Resists Stains.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.