IDES Prospector Already have an account? Login Here

IDES

Elastamide 300

Polyamide 6 Elastomer

Supplied by Elastomer Engineering Inc.

The technical datasheet with complete property values for Elastamide 300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Elastamide is a Nylon alloy which chemically bonds molecular lengths of Nylon-6 to molecular lengths of an elastomer. By varying the ratio of Nylon-6 to elastomer, the properties of the resultant copolymer can be adapted to specific performance requirements.
Elastamide combines the toughness of a nylon with the impact resistance and resiliency of an elastomer. It polymerizes in the mold to generate a finished part which is stress free.
Elastamide is a low-pressure molding system which allows the production of large part with varying thickness interfaces. It ca accommodate various additives, colorants, flame retardants, UV stabilizers, and fillers to make a specific copolymer for your particular requirements. Parts can be produced in detail or rough cast and machined to size.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Toughness
  • Medium Heat Resistance
  • Paintable
  • Resilient
  • Ultra High Impact Resistance
Uses 
  • Gears
  • Housings
  • Industrial Applications
  • Pulleys
  • Wheels
Forms 
  • Pellets
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Taber Abrasion Resistance (10 Cycles, 1000 g, CS-17 Wheel)
mg
 ASTM D1044
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F, 0.125 in
ft·lb/in
  
73°F, 0.125 in
 
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
50 Hz
 
  
1 kHz
 
  
100 kHz
 
  
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI)
V
 UL 746
Additional Information
The value listed as CTI, UL 746, was tested in accordance with ASTM D257.
Water Absorption, DIN 53714, 23°C, 50% RH: 1.7%
Crystallinity, Test method unspecified: 22%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elastamide 300, Elastamide , Elastamide300, 300, Polyamide 6 Elastomer, Nylon 6 Elast, Polyamide, Nylon, Elastomer Eng, Polyamide6Elastomer, Nylon6Elast
Features
Features may also be described by the following terms: Good Toughness, Tough, Ultra High Impact Resistance, Good Chemical Resistance, Chemical Resistant, Medium Heat Resistance, Good Abrasion Resistance, Abrasion Resistant.
Uses
Uses may also be described by the following terms: Housings, Housing.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.