IDES Prospector Already have an account? Login Here

IDES

POLIMAXX 320PC

Styrene Acrylonitrile

Supplied by IRPC Public Company Limited

The technical datasheet with complete property values for POLIMAXX 320PC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
320PC is a high chemical high heat grade of acrylonitrile styrene resin for injection molding with natural color and clarity. It is recommended for application where a resistance of chemical and heat are important such as lighter, cosmetic packaging, sanitary ware.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Good Chemical Resistance
  • High Heat Resistance
  • Medium Clarity
Uses 
  • Cosmetic Packaging
RoHS Compliance 
Appearance 
  • Natural Color
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Yield, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale, 73°F, 0.250 in)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.250 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLIMAXX 320PC, POLIMAXX , POLIMAXX320PC, 320 PC, 320PC, Styrene Acrylonitrile, SAN, IRPC, StyreneAcrylonitrile, PC320
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, High Heat Resistance, Medium Clarity.
Uses
Uses may also be described by the following terms: Cosmetic Packaging.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.