IDES Prospector Already have an account? Login Here

IDES

Adflex Q 402 F

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adflex Q 402 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adflex Q 402 F is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It is designed for air quenched blown film applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Latin America
  • North America
  
Features 
  • Autoclavable
  • Good Tear Strength
  • High Heat Resistance
  • Puncture Resistant
  
Uses 
  • Film
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Strain
     ISO 527-2
Yield, 73°F
%
  
Break, 73°F
%
  
Flexural Modulus (73°F)
psi
 ISO 178
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Puncture Resistance (2.0 mil)
ft·lb/in³
 Internal Method
Secant Modulus
     ASTM D882
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: Break, 2.0 mil, Blown Film
psi
  
TD: Break, 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Instrumented Dart Impact (2.0 mil, Blown Film)
ft·lb
 ISO 7765-2
Elmendorf Tear Strength
     ISO 6383-2
MD: 2.0 mil, Blown Film
lbf
  
TD: 2.0 mil, Blown Film
lbf
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240, ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature
°F
 DSC
Additional Information
Nominal Value
Unit
Test Method
Heat Resistance
°F
 Internal Method
Film property values shown were determined on 50 µm (2.0 mil) thickness blown film extruded at 238°C (460°F), 2.5:1 BUR, with a 2 mm (80 mil) die gap.
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adflex Q 402 F, Adflex , AdflexQ402F, Q 402 F, Q402, 402F, Q402F, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 402Q
Features
Features may also be described by the following terms: High Heat Resistance, Good Puncture Resistance, Puncture Resistant, Good Tear Strength, Autoclavable, Autoclave.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.