IDES Prospector Already have an account? Login Here

IDES

Adflex Q 301 F

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adflex Q 301 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adflex Q 301 F thermoplastic olefin resin is designed for impact modification of polypropylene, as well as for monolayer and multilayer air quenched blown films (no slip, no antiblock). It is based on proprietary Basell process technology.

This resin has no slip or antiblock and only minimal stabilization in order to allow wider design latitude for the compounder. Additional suitable stabilization is recommended to protect the resin during melt processing and throughout its useful life.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Latin America
  • North America
  
Features 
  • Food Contact Acceptable
  • Good Chemical Resistance
  • High ESCR (Stress Crack Resist.)
  • Low Temperature Impact Resistance
  
Uses 
  • Film
  • Multilayer Film
  • Plastics Modification
  • Sporting Goods
  • Toys
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792B
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
 
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adflex Q 301 F, Adflex , AdflexQ301F, Q 301 F, Q301, 301F, Q301F, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 301Q
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Chemical Resistance, Chemical Resistant, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Plastics Modification, Plastic Modification, Multilayer Film, Multi-layer Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.