TECHNYL® A 218 MT15 V25 Rhodia Polyamide 66 (Glass Fiber Reinforcement, 15%; Mineral Filler, 15%)

Product Description

Polyamide 66, reinforced with 25% of glass fibre and 15% of mineral filler, heat stabilized, for injection moulding.

TECHNYL A 218 MT15 V25 is recommended in all industrial parts, offering a good combination between thermal and mechanical properties.
This grade is commonly used in the automotive industry to mould large parts with a low warpage, such as:

car body parts, engine cover, rocker cover.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement, 15% Filler by Weight

Mineral Filler, 15% Filler by Weight

Additive

Heat Stabilizer

Lubricant

Features

Heat Stabilized

Low Warpage

Lubricated

Uses

Automotive Applications

Industrial Applications

Appearance

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density
--		--	g/cm³	ISO 1183
--		--	lb/in³	ISO 1183²
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Viscosity number		--	cm³/g	ISO 307, 1157, 1628²
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus
--		--	psi	ISO 527-2/1A
--			psi	ISO 527-2²
Tensile Stress
Break		--	psi	ISO 527-2/1A
Break			psi	ISO 527-2²
Tensile Strain
Break		--	%	ISO 527-2/1A
Break			%	ISO 527-2²
Flexural Modulus		--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength
--		--	ft·lb/in²	ISO 179/1eA
73°F			ft·lb/in²	ISO 179/1eA²
Charpy impact strength (73°F)			ft·lb/in²	ISO 179/1eU²
Notched Izod Impact Strength		--	ft·lb/in²	ISO 180/1A
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi		--	°F	ISO 75-2²
264 psi, Unannealed		--	°F	ISO 75-2/Af
264 psi		--	°F	ISO 75-2²
Melting Temperature (DSC)
--		--	°F	ISO 3146
--³		--	°F	ISO 11357-3²
CLTE
Flow		--	in/in/°F	ISO 11359-2²
Transverse: 73 to 185°F		--	in/in/°F	ISO 11359-2
Electrical	Dry	Conditioned	Unit	Test Method
Surface resistivity	--		ohm	IEC 60093²
Volume resistivity			ohm·in	IEC 60093²
Relative Permittivity (1 MHz)				IEC 60250²
Dissipation Factor (1 MHz)				IEC 60250²
Comparative tracking index	--			IEC 60112²
Electric strength			V/mil	IEC 60243-1²
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0630 in)		--		UL 94
Burning Behav. at 1.6mm nom. thickn. (0.06 in)		--		ISO 1210²
Additional Information
Dry	The value listed as Melting Temperature (DSC), ISO 3146, was tested in accordance with ISO 11357. Molding Shrinkage, Rhodia Method, Isotropy: 0.75 Molding Shrinkage, Rhodia Method, Normal/Perpendicular: 0.8% Molding Shrinkage, Rhodia Method, Parallel: 0.6%
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 218 MT15 V25, TECHNYL A 218 MT15 V25, TECHNYL® A , TECHNYL A, TECHNYLA218MT15V25, TECHNYLA, A 218 MT 15 V 25, A218 MT15 V25, A218, 218 MT 15 V 25, A218MT15V25, 218 MT15 V25, 218MT, MT15, 15V, V25, 218MT15V25, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, MT218, 218A
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Warpage, Low Warp.
Uses
Dry	Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® A 218 MT15 V25, TECHNYL A 218 MT15 V25, TECHNYL® A , TECHNYL A, TECHNYLA218MT15V25, TECHNYLA, A 218 MT 15 V 25, A218 MT15 V25, A218, 218 MT 15 V 25, A218MT15V25, 218 MT15 V25, 218MT, MT15, 15V, V25, 218MT15V25, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Rhodia, Polyamide66, Nylon66, MT218, 218A

Injection	Dry	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

TECHNYL® A 218 MT15 V25

Polyamide 66

Glass Fiber Reinforcement, 15%; Mineral Filler, 15%

Supplied by Rhodia Engineering Plastics SA