IDES Prospector Already have an account? Login Here

IDES

ISOTAL* C9W

Acetal (POM) Copolymer

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for ISOTAL* C9W is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
General purpose, unfilled polyacetal (POM) copolymer resin.

Isotal C9W has been approved by the Water Research Council in accordance with The Water Byelaws Scheme, "ITEMS WHICH HAVE PASSED FULL TESTS OF EFFECT OM WATER QUALITY - BS6920" for use in potable water applications in contact with cold water and hot water up to 85°C. Isotal C9W will be included in the Water Fittings and Materials Directory, Part Two, under number 9811505.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • General Purpose
  
Uses 
  • Fittings
  • General Purpose
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption (Equilibrium, 73°F, 50% RH)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B120
Electrical
Nominal Value
Unit
Test Method
Electric Strength (in Air)
V/mil
 IEC 60243-1
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: ISOTAL* C9W, ISOTAL C9W, ISOTAL* , ISOTAL, ISOTALC9W, C 9 W, C9W, C9, 9W, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, SABIC IP Euro, AcetalPOMCopolymer, 9C
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.