IDES Prospector Already have an account? Login Here

IDES

Altuglas® MI-2T

Polymethyl Methacrylate Acrylic

Supplied by Altuglas International of Arkema Inc.

The technical datasheet with complete property values for Altuglas® MI-2T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Additive 
  • Antiblock
  • Lubricant
  
Features 
  • Antiblocking
  • Good Impact Resistance
  • Good UV Resistance
  • High Heat Resistance
  • Lubricated
Appearance 
  • Clear/Transparent
Forms 
  • Granules
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
  • Profile Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Melt volume-flow rate (230°C/3.8 kg)
in³/10min
 ISO 1133 2
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Tensile Creep Modulus
     ISO 899-1 2
1 hr
psi
  
1000 hr
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength (73°F)
ft·lb/in²
 ISO 179/1eA 2
Charpy impact strength (73°F)
ft·lb/in²
 ISO 179/1eU 2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ISO 75-2 2
66 psi
°F
  
264 psi
°F
  
Vicat Softening Temperature (50°C/h, B (50N))
°F
 ISO 306 2
CLTE - Flow
in/in/°F
 ISO 11359-2 2
Electrical
Nominal Value
Unit
Test Method
Surface resistivity
ohms
 IEC 60093 2
Volume resistivity
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Comparative tracking index
 
 IEC 60112 2
Electric strength
V/mil
 IEC 60243-1 2
Flammability
Nominal Value
Unit
Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)
 
 ISO 1210 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Altuglas® MI-2T, Altuglas MI2T, Altuglas® , Altuglas, AltuglasMI2T, MI, MI 2 T, MI-2T, MI2T, MI:2T, MI/2T, MI+2T, MI_2T, MI 2T, MI2, 2T, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Altuglas/Arkema, AcrylicPolymethylMethacrylate, AcrylicPMMA, 2MI
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Heat Resistance, Good Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.