Orgalloy LE 60SF Arkema Polyamide 6 Alloy

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Features

Good Impact Resistance

High Heat Resistance

Platable

Forms

Pellets

Processing Method

Calendering

Casting

Coating

Extrusion

Film Extrusion

Injection Molding

Resin Transfer Molding

Sheet Extrusion

Physical	Dry	Conditioned	Unit	Test Method
Density			lb/in³	ISO 1183²
Melt volume-flow rate (235°C/2.16 kg)		--	in³/10min	ISO 1133²
Water Absorption				ISO 62²
Saturation		--	%
Equilibrium		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	--		psi	ISO 527-2²
Tensile Stress (Yield)	--		psi	ISO 527-2²
Tensile Strain (Yield)	--		%	ISO 527-2²
Nominal strain at break	--		%	ISO 527-2²
Tensile Creep Modulus				ISO 899-1²
1 hr	--		psi
1000 hr	--		psi
Thermal	Dry	Conditioned	Unit	Test Method
Vicat Softening Temperature (50°C/h, B (50N))		--	°F	ISO 306²
Melting Temperature³		--	°F	ISO 11357-3²
Electrical	Dry	Conditioned	Unit	Test Method
Surface resistivity	--		ohms	IEC 60093²
Comparative tracking index	--			IEC 60112²
Flammability	Dry	Conditioned	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)		--		ISO 1210²
Burning Behav. at thickness h (0.126 in)		--		ISO 1210²
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Orgalloy® LE 60SF, Orgalloy LE 60SF, Orgalloy® , Orgalloy, OrgalloyLE60SF, LE 60 SF, LE 60SF, LE60, 60SF, LE60SF, Polyamide 6 Alloy, Nylon 6 Alloy, Polyamide, Nylon, Arkema, Polyamide6Alloy, Nylon6Alloy, 60LE
Features
Dry	Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Orgalloy® LE 60SF, Orgalloy LE 60SF, Orgalloy® , Orgalloy, OrgalloyLE60SF, LE 60 SF, LE 60SF, LE60, 60SF, LE60SF, Polyamide 6 Alloy, Nylon 6 Alloy, Polyamide, Nylon, Arkema, Polyamide6Alloy, Nylon6Alloy, 60LE

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

Orgalloy® LE 60SF

Polyamide 6 Alloy

Supplied by Arkema