|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 1.0 mil, Blown Film
|
|
psi
|
|
|
1% Secant, TD: 1.0 mil, Blown Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Yield, 1.0 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 1.0 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.0 mil, Blown Film
|
|
%
|
|
|
TD: Break, 1.0 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact 2 (1.0 mil, Blown Film)
|
|
g
|
ASTM D1709 |
|
Elmendorf Tear Strength
|
|
|
ASTM D1922 |
|
MD: 1.0 mil, Blown Film
|
|
g
|
|
|
TD: 1.0 mil, Blown Film
|
|
g
|
|
|
Oxygen Permeability (1.0 mil, Blown Film)
|
|
cm³·mil/100in²/atm/24 hr
|
ASTM D3985 |
|
Water Vapor Transmission Rate (1.0 mil, Blown Film)
|
|
g·mil/100in²/atm/24 hr
|
ASTM F1249 |
|
Instrumented Dart Impact (0.00100 in, Blown Film)
|
|
in·lb
|
ASTM D3763 |
|
Vicat Softening Temperature 3
|
|
°F
|
ASTM D1525 |
|
Gardner Gloss (1.00 mil, Blown Film)
|
|
|
ASTM D523 |
|
Haze 4 (Blown Film)
|
|
%
|
ASTM D1003 |
|
Typical blown film properties with 3% SKR17 slip/antiblock, I mil ( 0.025 mm) film (2.5:1 BUR) 35 mil ( 0.90 mm) die gap.
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: K-Resin® SBC DK11, KResin SBC DK11, K-Resin® SBC , KResin SBC, K:Resin® SBC, K/Resin® SBC, K+Resin® SBC, K_Resin® SBC, K Resin® SBC, KResinSBCDK11, KResinSBC, K_Resin SBC, K Resin SBC, SBCDK 11, K_ResinSBC, SBCDK11, SBC, DK 11, DK11, Styrene Butadiene Block Copolymer, Thermoplastic Elastomer, TPE, sb, CP Chem, StyreneButadieneBlockCopolymer, ThermoplasticElastomer, 11DK, 11SBCDK
|
|
Features may also be described by the following terms: High Clarity, High Gloss, Good Heat Seal, Good Toughness, Tough, Good Stiffness.
|
|
Uses may also be described by the following terms: Medical Packaging, Food Packaging, Shrink Wrap.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), USP (1).
|