IDES Prospector Already have an account? Login Here

IDES

INEOS LLDPE LL0220AA

Linear Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LLDPE LL0220AA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL0220 AA has been specially developed for the production of handwrap and other cast stretch films. It can also be used as a blending partner in LDPE or LLDPE in both cast and blown film applications.

Characteristics
LL0220 AA is a linear low density polyethylene copolymer containing butene-1 (C4) as the comonomer. LL 0220 AA offers the following advantages when it is processed by the cast extrusion process:
  • good balance of mechanical properties
  • good optical properties
  • good cling performance.

We recommend that you consult your INEOS technical representative for further advice on the use of LL0220AA.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Butene Comonomer
  • Opticals
Uses 
  • Blending
  • Cast Film
  • Film
  • Stretch Wrap
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Tensile Modulus
    ISO 527-3/150
1% Secant, MD: 0.79 mil
psi
 
1% Secant, TD: 0.79 mil
psi
 
Tensile Stress
    ISO 527-3/150
MD: Yield, 0.79 mil
psi
 
TD: Yield, 0.79 mil
psi
 
MD: 0.79 mil
psi
 
TD: 0.79 mil
psi
 
Tensile Elongation
    ISO 527-3/150
MD: Break, 0.79 mil
%
 
TD: Break, 0.79 mil
%
 
Dart Drop Impact (0.79 mil)
g
ASTM D1709A
Elmendorf Tear Strength
    ASTM D1922
MD: 0.8 mil
lbf/in
 
TD: 0.8 mil
lbf/in
 
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A50
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.787 mil)
 
ASTM D2457
Haze (0.787 mil)
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Puncture Resistance (0.8 mil)
in·lb/mil
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LLDPE LL0220AA, INEOS LLDPE , INEOSLLDPELL0220AA, INEOSLLDPE, LLDPELL 0220 AA, LLDPELL0220AA, LLDPELL0220, LLDPE, LL 0220 AA, LL0220AA, LL0220, 0220AA, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLinearLowDensity, 0220LL, 0220LLDPELL
Features
Features may also be described by the following terms: Butene Comonomer.
Uses
Uses may also be described by the following terms: Stretch Wrap, Cast Film.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Extrusion Notes
Blown Film Melt Temperature: 165 to 215°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.