Ultradur® B 4300 G10 BASF Polybutylene Terephthalate (Glass Fiber Reinforcement, 50%)

Product Description

Injection molding grade with 50 % glass fibers for very rigid technical parts (eg PCBs and small motor housings).

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 50% Filler by Weight

Features

High Rigidity

Uses

Housings

Agency Ratings

RoHS Compliance

Appearance

Black

Colors Available

Natural Color

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Multi-Point Data

Creep Modulus vs. Time (ISO 11403-1)

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Resin ID (ISO 1043)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)		in³/10min	ISO 1133
Molding Shrinkage²			ISO 294-4
Across Flow: 0.118 in		%
Flow: 0.118 in		%
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Viscosity Number³		cm³/g	ISO 307
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress (Break, 73°F)		psi	ISO 527-2
Tensile Strain (Break, 73°F)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 961/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature		°F	ISO 11357-3
CLTE - Flow (73 to 176°F)		in/in/°F	ISO 11359-2
Thermal Conductivity		Btu·in/hr/ft²/°F	DIN 52612
Maximum Service Temperature - Short Cycle Operation		°F
Specific Heat Capacity		Btu/lb/°F
Temperature Index - 50% Loss of Tensile Strength			IEC 60216
--⁴		°F
--⁵		°F
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity			IEC 60250
73°F, 100 Hz
73°F, 1 MHz
Dissipation Factor			IEC 60250
73°F, 100 Hz
73°F, 1 MHz
Comparative Tracking Index			IEC 60112
Solution A		V
Solution B		V
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0157 in
0.0630 in
Flammability by Electrical Sources of Ignition⁶ (0.16 in)			IEC 60707
Additional Information	Nominal Value	Unit	Test Method
Automotive Materials (> 39.4 mil)			FMVSS 302
ISO Type			ISO 7792
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultradur® B 4300 G10, Ultradur B 4300 G10, Ultradur® , Ultradur, UltradurB4300G10, B 4300 G 10, B 4300 G10, B4300, 4300G, G10, B4300G10, Polybutylene Terephthalate, PBT, Polyester, BASF, PolybutyleneTerephthalate, 4300B
Features
Features may also be described by the following terms: High Rigidity.
Uses
Uses may also be described by the following terms: Housings, Housing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²plate with film gate, 150*150*3 mm

³solution 0,005 g/ml Phenole/1,2 Dichlorbenzol 1:1

⁴20000 hr

⁵5000 hr

⁶Method BH

Ultradur® B 4300 G10

Polybutylene Terephthalate

Glass Fiber Reinforcement, 50%

Supplied by BASF Corporation