IDES Prospector Already have an account? Login Here

IDES

NORYL* PX5622 Resin

Polyphenylene Ether + PS

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for NORYL* PX5622 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. Good flow and surface aesthetics. UL94 V0/5VA/5VB. RTI Elec/Imp/Str 65. Suitable for E/E market indoor/outdoor applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Good Flow
  • Good Surface Finish
Uses 
  • Electrical/Electronic Applications
  • Outdoor Applications
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
220°C/10.0 kg
g/10 min
  
230°C/2.16 kg
g/10 min
  
230°C/3.8 kg
g/10 min
  
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 3
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 3
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 4 (3.94 in Span)
psi
 ASTM D790
Flexural Strength 4 (Yield, 3.94 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 5
CLTE
     ASTM E831
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0590 in
 
  
0.0950 in
 
  
0.127 in
 
  
Oxygen Index
%
 ASTM D2863
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL* PX5622 Resin, NORYL PX5622 Resin, NORYL* , NORYL, NORYLPX5622Resin, PX 5622 Resin, PX5622 Resin, PX5622, 5622Resin, PX5622Resin, Polyphenylene Ether + PS, Polyphenylene Ether PS, Polyphenylene Ether : PS, Polyphenylene Ether / PS, Polyphenylene Ether - PS, Polyphenylene Ether _ PS, Polyphenylene Ether PS, PPE+PS, PPEPS, PPE:PS, PPE/PS, PPE-PS, PPE_PS, PPE PS, Polyphenylene Ether, PPE, SABIC IP, PolyphenyleneEtherPS, PolyphenyleneEther, PolyphenyleneEther_PS, 5622PX
Generic Name
Generic Name may also be described by the following terms: PPO.
Features
Features may also be described by the following terms: Good Surface Finish, Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free, Good Flow.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 2.0 in/min
40.10 in/min
5Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.