IDES Prospector Already have an account? Login Here

IDES

CYCOLAC* DL100 Resin

Acrylonitrile Butadiene Styrene

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for CYCOLAC* DL100 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CYCOLAC DL100 is a high heat, high impact, low emissions ABS/PC blend.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Heat Resistance
  • High Impact Resistance
  
RoHS Compliance 
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow 2
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress
      
Yield
psi
 ISO 527-2/5
Yield
psi
 ISO 527-2/50
Tensile Strain
      
Yield
%
 ISO 527-2/5
Yield
%
 ISO 527-2/50
Break
%
 ISO 527-2/5
Break
%
 ISO 527-2/50
Flexural Modulus 3
psi
 ISO 178
Flexural Strength 3, 4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 5
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength 6
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 7
      
66 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Ae
Vicat Softening Temperature
      
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
CLTE
     ISO 11359-2
Flow: 73 to 140°F
in/in/°F
  
Transverse: 73 to 140°F
in/in/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in, Testing by SABIC
 
  
0.118 in, Testing by SABIC
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics, Cyclac

Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLAC* DL100 Resin, CYCOLAC DL100 Resin, CYCOLAC* , CYCOLAC, CYCOLACDL100Resin, DL 100 Resin, DL100 Resin, DL100, 100Resin, DL100Resin, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Euro, AcrylonitrileButadieneStyrene, 100DL
Features
Features may also be described by the following terms: High Heat Resistance, High Impact Resistance.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): OPEL (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.079 in/min
4Yield
580*10*4 sp=62mm
680*10*4
7120*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.