IDES Prospector Already have an account? Login Here

IDES

CYCOLOY* C4220 Resin

Acrylonitrile Butadiene Styrene + PC

Glass Fiber Reinforcement, 20%

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for CYCOLOY* C4220 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CYCOLOY C4220 is a 20% glass reinforced, non FR PC+ABS grade. It shows high heat resistance, excellent strength and rigidity with good cosmetic appearance that combines a good processabity with a low shrinkage.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Good Processability
  • Good Strength
  • High Heat Resistance
  • Low Shrinkage
  • Medium Rigidity
  • Pleasing Surface Appearance
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow 2
in/in
 Internal Method
Water Absorption     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress     ISO 527-2/5
Yield
psi
  
Break
psi
  
Tensile Strain     ISO 527-2/5
Yield
%
  
Break
%
  
Flexural Modulus 3
psi
 ISO 178
Flexural Strength 3, 4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 5 (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength 5 (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength 6 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 6 (73°F)
ft·lb/in²
 ISO 180/1U
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 7      
66 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Ae
Vicat Softening Temperature      
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Ball Pressure Test     IEC 60695-10-2
167°F
 
  
257°F
 
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics, Cycloy

Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* C4220 Resin, CYCOLOY C4220 Resin, CYCOLOY* , CYCOLOY, CYCOLOYC4220Resin, C 4220 Resin, C4220 Resin, C4220, 4220Resin, C4220Resin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 4220C
Features
Features may also be described by the following terms: High Heat Resistance, Pleasing Surface Appearance, Good Strength, Good Processability, Easy Processing, Medium Rigidity, Good Rigidity, Low Shrinkage.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.079 in/min
4Break
580*10*3 sp=62mm
680*10*3
7120*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.