IDES Prospector Already have an account? Login Here

IDES

Geon™ Vinyl Packaging 1699

Rigid Polyvinyl Chloride

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ Vinyl Packaging 1699 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • General Purpose
  • High Gloss
  • High Impact Resistance
Uses 
  • Bottles
  • General Purpose
  • Packaging
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ASTM D1505
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Injection Molded)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
°F
 ASTM D648
Optical
Nominal Value
Unit
Test Method
Transmittance
     Internal Method
30.0 mil, 400 nm
%
  
30.0 mil, 700 nm
%
  
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Vinyl Packaging 1699, Geon Vinyl Packaging 1699, Geon™ Vinyl Packaging , Geon Vinyl Packaging, GeonVinylPackaging1699, GeonVinylPackaging, Packaging 1699, Packaging1699, Packaging, 1699, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride, 1699Packaging
Features
Features may also be described by the following terms: High Gloss, High Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.